FACTORY ENGINE LOCATION
SPECIFICATIONS
Extremely Important! TTI
Headers were designed to fit with the engines
located to the factory
specifications. If the engine is not located
correctly in the
chassis, the headers will not fit
properly. Use the following dimensions to check
your engine location before
installing your headers.
From the center of the crankshaft
to the top of the K-frame the correct distance
is 5-1/4”. The engine
is also off-set toward the passenger-side.
Measure from
the center of the crankshaft to
each frame rail. The distance should be
2-1/2”
(62-65 B-bodies difference should
be 3” and 65-73 C-bodies difference should
be 3-1/2”). If
necessary place shims between the insulator assembly
and the
K-frame mounting pad to achieve the
proper dimensions.
