W2 "Step" Headers
TTI Header's are constructed of 16 gauge mild steel tubing, mandrel bent on sophisticated computer controlled bending machines for precise fit and uninterrupted exhaust flow. The mandrel bending process maintains a constant inside diameter of the tube for a smoother finish with no restriction of flow and no crimping of the tubes.
Recommended for 320-575 horsepower
1-5/8" O.D. primary tubes / steps up to 1-3/4" O.D. secondary tubes / merged into 3" collectors
"Step" design provides low-end response and top-end horsepower gain
3/8" thick laser-cut header and collector flanges, contoured for a leak free fit
Above the steering center link design (under chassis) offers maximum header to ground clearance
Full length header design for proven power gains
Removal of the torsion bars not required
"A" (RH-side),"B", "E", "F", & "M"-body headers are one piece headers / No slip tubes
"A"-body (LH-side) header, # 7 cylinder tube is a slip-tube. Designed to be removed from the header so that it can be slipped around the torsion bar
Easy spark-plug access
Header Sets Include: 1/16" Header & Collector Gaskets, Header Bolts (16pcs) and Reducers/Adapters for hook-up to your Exhaust System
Fits Applications:
1967-1976 "A"-bodies
1962-1974 "B"-bodies
1970-1974 "E"-bodies
1976-1980 "F"-bodies
1977-1988 "M"-bodies
|
Small Block W2 1-3/4" "Step" Headers |
(Click on number to open footnote) |
|
| Front End |
Stock |
33 |
| Engine Sizes |
273 / 318 / 340 / 360 A-engines 402 Magnum Crate engines |
37, 39 |
| Cylinder Heads |
W2 Econo Head - Casting no. 3870810 W2 Chrysler Classic Head - Part no. P4532693 Mopar Aluminum Magnum Head - Casting no. P4532900 Large Port Commando Head - Casting no. P4532795 |
14, 26 |
| Auto Trans | Yes | 23 |
| Standard Trans | Yes | 53, 55 |
| Floor Shift | Yes | 23 |
| Column Shift | Yes | 6 |
| Push Button | Yes | |
| Power Steering | Yes | |
| Manual Steering | Yes | |
| Air Conditioning | Yes | |
| Starters | OEM or Listed starters only | 10, 18 |
| Steering Linkage | OEM only | 33 |
| Clutch Linkage | OEM only | 55 |
| Oil Filters | Screw-on short style or a 90° Remote Adapter | |
| Oil Pans | OEM or Milodon | 11 |
|
Coating Options / Header Part No's: |
"A" - body applications |
"B, E, F & M" body applications |
|
|
"Raw" (Bare Mild Steel) $623 |
Part # TTI340AW2-C0 | Part # TTI340BEW2-C0 | 17, C0 |
|
Nickel Chrome Plated $644 |
Part # TTI340AW2-C1 | Part # TTI340BEW2-C1 | 17, C1 |
|
Ceramic Coated (outside only) $680 |
Part # TTI340AW2-C2 | Part # TTI340BEW2-C2 | 17, C2 |
|
Polished Ceramic Coated (outside only) $710 |
Part # TTI340AW2-C3 | Part # TTI340BEW2-C3 | 17, C3 |
|
Ceramic Coated with a Thermal Barrier $740 |
Part # TTI340AW2-C4 | Part # TTI340BEW2-C4 | 17, C4 |
|
Polished Ceramic Coated with a Thermal Barrier $770 |
Part # TTI340AW2-C5 | Part # TTI340BEW2-C5 | 17, C5 |
Prices
do not include Shipping, Handling or California Sales Tax, if applicable. Prices subject to change without notice.
|
|
|
|
|
|
Click an image for a detailed view.
|
Starter Clearance |
Belly view |
Pic 3 |
Pic 4 |
|
Center bolt hole pattern spread measures 3-15/16" from center of left bolt hole to the center of right bolt hole. |
|
|
|
Go to > 1-7/8" HEADERS |
||
|
Additional Options: Tubes and Fittings can be installed prior to coating. These orders will be considered "Special Orders". Please Note: TTI requires a $100 non-refundable deposit for all "Special Orders" prior to the start of your order. The balance will be due upon completion of your order. Please allow 3-4 weeks additional time for the coating process.
|
|
Tube Technologies, Inc. TTI Performance Exhaust & Headers 1555 Consumer Circle ● Corona, CA 92880 (951) 371-4878 ● Fax: (951) 371-6143 |
Designed and Maintained By: Tube Tech Inc. 2009 Tube Technologies, Inc. All rights reserved. Updated: January 05, 2012 |
