|
|
| Header Reducer / Adapter kits are supplied with all TTI Headers for hook-up to your Exhaust System, from the header collectors to the H-pipe or X-pipe. |
|
Kit Includes: (2) Aluminized tubes with welded 3.5" 3-bolt flanges, 3/8” thick. (2) 3.5" 3-bolt Gaskets, 1/16" thick. (6) Bolts, Nuts & Washers
|
 |
| REDUCER sizes available for TTI 400 Low-Deck 2-1/8" "Step" Headers w/ 3.5" collectors: |
| Exhaust Size |
Reducer Description |
TTI Part # | |
| 62-65 "B"-body | 2.5" | 3.5" x 2.5" pre-bent design | RED35X25B6265 |
|
62-65 "B"-body with Indy 440-1 or Indy 440-SR heads. |
2.5" | 3.5" x 2.5" pre-bent design | RED35X25B6265-I |
|
67-76 "A"-body 66-74 "B"-body |
2.5" | 3.5" x 2.5" x 6" long | RED35X25X6 |
| 70-74 "E"-body | 2.5" | 3.5" x 2.5" x 5" long | RED35X25X5 |
| 62-65 "B"-body | 3" | 3.5" x 3.0" pre-bent design | RED35X30B6265 |
|
62-65 "B"-body with Indy 440-1 or Indy 440-SR heads. |
3" | 3.5" x 3.0" pre-bent design | RED35X30B6265-I |
|
67-76 "A"-body 66-74 "B"-body |
3" | 3.5" x 3.0" x 6" long | RED35X30X6 |
| 70-74 "E"-body | 3" | 3.5" x 3.0" x 5" long | RED35X30X5 |
| ADAPTER sizes available for TTI 400 Low-Deck 2-1/8" "Step" Headers w/ 3.5" collectors: |
| Exhaust Size |
Reducer Description |
TTI Part # | |
|
67-76 "A"-body 66-74 "B"-body |
3.5" | 3.5" x 3.5" x 6" long | RED35X35X6 |
| 70-74 "E"-body | 3.5" | 3.5" x 3.5" x 5" long | RED35X35X5 |
|
Tube Technologies, Inc. ● 1555 Consumer Circle ● Corona, CA 92880 ● (951) 371-4878 ● Fax: (951) 371-6143 2008 Tube Technologies, Inc. All rights reserved. Site Maintained By: TTI Updated: February 09, 2009 |