5.7L Hemi Headers

Generation 3 Hemi Crate Engines

 

TTI's 5.7L Hemi Crate Headers are constructed of 16 gauge mild steel tubing, mandrel bent on sophisticated computer controlled bending machines for precise fit and uninterrupted exhaust flow.  The mandrel bending process maintains a constant inside diameter of the tube for a smoother finish with no restriction of flow and no crimping of the tubes.

5.7L Hemi Headers

Footnotes

(Click on number to open footnote)
Engine Sizes

5.7L Hemi Crate

32
Cylinder Heads

OEM only

  
Front-Ends

Stock

(Magnumforce or RMS AlterKtion Tubular K-frame,

coil over suspensions must use header P/N: TTI6.1HCA)

33,  68
Auto / Standard Trans

Yes

Header is designed to fit transmissions with the starter on the Drivers-side only.
23, 53
Floor Shift Yes

23
Column Shift No  
Power Steering A-bodies = No  /  B&E-bodies = Yes  
Manual Steering Yes  
Air Conditioning Modification required

67
Starters Must use listed starters only

27
Flywheel / Bellhousing 10.5" or 11" 27
Steering Linkage OEM only

12,  33
Clutch Linkage Hydraulic clutch recommended

22
Oil Filters OEM or Remote Mount

56
Oil Pans Mid sump

47

 

Coating Options

Header Part No's

Raw Steel (bare metal)

$623

Footnote:  C0

Ceramic Coated

with a Thermal Barrier

$740

Footnote:  C4

Polished Ceramic Coated

with a Thermal Barrier

$770

Footnote:  C5

Footnotes

If using *Engine Mounts, use this part no.

67-72 "A"-bodies

62-74 "B"-bodies     

70-74 "E"-bodies

 Part # TTi 57HC-C4 Part # TTi 57HC-C4 Part # TTi 57HC-C5 17,  *69

If using *Spool Mounts, use this part no.

73-76 "A"-bodies

 Part # TTi 57SM-C4 Part # TTi 57SM-C4 Part # TTi 57SM-C5 17,  *69

 Prices do not include Shipping, Handling or California Sales Tax, if applicable.  Prices subject to change without notice.

LH view

RH view

Header Reducers/Adapters

TTI Header Gasket

 (.PDF)

Click an image for a detailed view.

 

Component Parts

 

 

TTi "Biscuit Style" Engine Mounts

Includes: (7) 10mm x 25mm x 1.5 pitch bolts

 Notes:

-  Rubber insulators are not included.

-  Designed for use with V8 K-member only.

 Year/Body Style TTI Part No.

$137 set
67-72 "A" 57MMA

TTi "Biscuit Style" Engine Mounts

Includes: (7) 10mm x 25mm x 1.5 pitch bolts

 Notes:

-  Rubber insulators are not included.

-  Designed for use with V8 K-member only.

 Year/Body Style TTI Part No.

$137 set

66-72 "B"

57MMBE

70-74 "E"

TTi Spool Mounts

Includes:

(4) Polyurethane insulators

(4) 1/2" SAE flat washers

(2) ¾” O.D. x .120 plated sleeves

(7) 10mm x 25mm x 1.5 pitch bolts

(2)  ½ -13 x 5½” grade 8 bolts w/ lock nuts.

 Note:  Designed for use with V8 K-member only.

Year/Body Style

TTI Part No.

$257.50 set
62-65 "B" 57SMB625

TTi Spool Mounts

Includes:

(4) Polyurethane insulators

(4) 1/2" SAE flat washers

(2) ¾” O.D. x .120 plated sleeves

(7) 10mm x 25mm x 1.5 pitch bolts

(2)  ½ -13 x 5½” grade 8 bolts w/ lock nuts.

 Note:  Designed for use with V8 K-member only.

Year/Body Style

TTI Part No.

$257.50 set
73-76 "A" 57SMA73

73-74 "B"

 57SMB73

Click image for

a detailed view.

TTI Filter Blocking Plate

(1) 4130 steel blocking plate with machined O-ring groves.

(2) Viton O-rings installed into the O-ring groves.

(3) Bolts - 6mm x 1.0 pitch x 16mm long with lock washers.

  Note: 67-76 A-body & 62-65 B-body applications with 5.7 / 6.1 / 6.4 Hemi Headers must use a Filter block plate in conjunction with a remote mounted oil filter.  Without a filter assembly, the oil flow to the engine will be blocked and will result in engine failure.

TTI Part No.

0200-FBP

 $70.00 ea.

 

 

Tube Technologies, Inc.

TTI Performance Exhaust & Headers

1555 Consumer Circle ●  Corona, CA 92880

(951) 371-4878 ●  Fax: (951) 371-6143

Designed and Maintained By:  Tube Tech Inc.

2009 Tube Technologies, Inc.  All rights reserved.

Updated: February 17, 2012