6.1L / 6.4L Hemi Headers
Tubular K-frame, Coil-over Suspension required
TTI's Hemi Crate Headers are constructed of 16 gauge mild steel tubing, mandrel bent on sophisticated computer controlled bending machines for precise fit and uninterrupted exhaust flow. The mandrel bending process maintains a constant inside diameter of the tube for a smoother finish with no restriction of flow and no crimping of the tubes.
6.1L: 1-3/4" O.D. tubes / merged into 3.0" collectors
6.4L: 2.0" O.D. tubes / merged into 3.5" collectors
3/8" thick laser-cut header and collector flanges, contoured for a leak free fit
Designed for Magnumforce or RMS Rack & Pinion / Manual or power-steering
Full length header design for proven power gains
One piece header tubes / No slip tubes
Header Sets Include: 1/16" Header & Collector Gaskets, Header Bolts (16pcs) and Reducers/Adapters for hook-up to your Exhaust System.
Fits Applications:
1967-1976 "A"-bodies
1962-1974 "B"-bodies
1970-1974 "E"-bodies
| 6.1 / 6.4 Hemi Headers |
Click on number to open footnote |
|||
| Engine Sizes |
6.1L and 6.4L Hemi Crate |
|||
| Cylinder Heads |
OEM only |
|||
| Front End |
Tubular K-frame, coil-over suspensions Magnumforce or RMS |
33 | ||
| Auto / Standard Trans |
|
23, 53 | ||
| Floor Shift | Yes | 23 | ||
| Column Shift | No | |||
| Power Steering | Yes | |||
| Manual Steering | Yes | |||
| Air Conditioning | Yes | |||
| Starters | Specific starters required depending on application combination | 27 | ||
| Flywheel / Bellhousing | 10.5" or 11" | 27 | ||
| Steering Linkage | Magnumforce or RMS Rack & Pinion / Manual or power-steering | |||
| Clutch Linkage | Hydraulic clutch recommended | |||
| Oil Filters | OEM or Remote Mount | |||
| Oil Pans | Mid sump | 47 | ||
|
Coating Options |
6.1 1-3/4" Hemi Crate Engine |
6.4 2" Hemi Crate Engine |
|
|
Raw Steel (bare metal) $740 |
1-3/4" Part # TTi 61HCA-C0 | 2.0" Part # TTi 64LHCA-C0 | 17, C0 |
|
Ceramic Coated with a Thermal Barrier $740 |
1-3/4" Part # TTi 61HCA-C4 |
2.0" Part # TTi 64LHCA-C4 |
17, C4 |
|
Polished Ceramic Coated with a Thermal Barrier $770 |
1-3/4" Part # TTi 61HCA-C5 |
2.0" Part # TTi 64LHCA-C5 |
17, C5 |
Prices
do not include Shipping, Handling or California Sales Tax, if applicable. Prices subject to change without notice.
|
6.1 1-3/4" HEADERS
|
6.4 2" HEADERS
|
|
Click an image for a detailed view.
|
Tube Technologies, Inc. TTI Performance Exhaust & Headers 1555 Consumer Circle ● Corona, CA 92880 (951) 371-4878 ● Fax: (951) 371-6143 |
Designed and Maintained By: Tube Tech Inc. 2009 Tube Technologies, Inc. All rights reserved. Updated: February 17, 2012 |
Header is designed to fit transmissions
with the starter on the Drivers-side only.
