2-1/4" Headers

2-1/4" Hemi Headers

Tubular K-frame, Coil-over Suspension required.

TTI's Headers are constructed of 16 gauge mild steel tubing, mandrel bent on sophisticated computer controlled bending machines for precise fit and uninterrupted exhaust flow. The mandrel bending process maintains a constant inside diameter of the tube for a smoother finish with no restriction of flow and no crimping of the tubes.

Recommended for 600+ horsepower
2-1/4" O.D. tubes / merged into 3-1/2" collectors
3/8" thick laser-cut header and collector flanges, contoured for a leak free fit
Above the steering center link design (under chassis) offers maximum header to ground clearance
Full length header design for proven power gains
One piece header tubes / No slip tubes
Header Sets Includes: 1/16" Header & Collector Gaskets, Header Bolts (18pcs) and a Universal Header Adapter kit for hook-up to your Exhaust System.
Fits Applications:
- 1967-1976 "A"-bodies
- 1962-1974 "B"-bodies
- 1970-1974 "E"-bodies

2-1/4" Hemi Headers		Footnotes Click on number to open footnote
Front Ends	Tubular K-frame, Coil-over Suspension required: MagnumForce or Reilly Motorsports (RMS)	33, 60
"A"-bodies only	Engines Size: 426, 472 or 528 Crate Cylinder Heads: Stock Hemi Heads or Stage 5 (Stock port location) Indy Max Block: With Indy 426-1 or 426-1RA Heads	19, 62
"B" & "E"-bodies	Engines Size: 426, 472 or 528 Crate Cylinder Heads: Stock Hemi Heads, Stage 5 (Stock port location), Indy 426-1 or Indy 426-1RA	19
Auto Trans	Yes	64
Standard Trans	Yes
Floor Shift	Yes
Column Shift	N/A
Push Button	N/A
Power Steering	N/A
Manual Steering	Yes
Starters	OEM or Listed starters only Indy Max Block: With Indy 426-1 or 426-1RA Heads	10 62
Flywheel / Bellhousing	10.5" or 11"	28
Steering Linkage	Rack & Pinion (Headers will not clear the Unisteer Rack & Pinion)	33
Clutch Linkage	OEM or Hydraulic
Oil Filters	OEM or Remote Mount
Oil Pans	OEM or Listed Milodon pans only	11
Valve Covers	OEM or Cast Aluminum

Coating Options / Header Part No's:

"Raw" (Bare Mild Steel)

$724

Footnote: C0

Part # B2HEMI-214C0

Ceramic Coated

with a Thermal Barrier

$894

Footnotes: 17, C4

Part # B2HEMI-214C4

Polished Ceramic Coated

with a Thermal Barrier

$923

Footnotes: 17, C5

Part # B2HEMI-214C5

Prices do not include Shipping, Handling or California Sales Tax, if applicable. Prices subject to change without notice.

Click a photo to view larger detailed image

LH view

RH view

Starter clearance

Universal Adapter kit

Header Gasket

(.PDF)

Additional Options:

Tubes and Fittings can be installed prior to coating. These orders will be considered "Special Orders". Please Note: TTI requires a $100 non-refundable deposit for all "Special Orders" prior to the start of your order. The balance will be due upon completion of your order. Please allow 2-3 weeks additional time for coating process.

O2 Sensor Fittings

Oxygen Sensors
18mm threads
Steel
Part #MISC-O2
$38 / Fittings + Installation (LH&RH)

Evac Tubes

Mr. Gasket Crankcase Evacuation System
(2) Chrome plated push-on valve cover breathers
Breather grommets
Check valves
3-1/2'' long threaded tubes
Part # KIT-EV6002
$102 / Kit + Installation

EGT Probe Fitting

Exhaust Gas Temperature fittings
1/8" pipe / Internal thread
When ordering, specify which cylinders you want fitting installed on.
Part # MISC-EGT
$17 / Each fitting + Installation

Tube Technologies, Inc.

TTI Performance Exhaust & Headers

1555 Consumer Circle ● Corona, CA 92880

(951) 371-4878 ● Fax: (951) 371-6143

Designed and Maintained By: Tube Tech Inc.

Updated: August 23, 2010