Early B-body Hemi Headers

62-65 B-body / Hemi Headers

Recommended for 600+ horsepower

TTI headers are constructed of 16 gauge mild steel tubing, mandrel bent on sophisticated computer controlled bending machines for precise fit and uninterrupted exhaust flow. The mandrel bending process maintains a constant inside diameter of the tube for a smoother finish with no restriction of flow and no crimping of the tubes.

Available in 2-1/8" or 2-1/4" O.D. tubes / merged into 3-1/2" collectors
3/8" thick laser-cut header and collector flanges, contoured for a leak free fit
Above the steering center link design (under chassis) offers maximum header to ground clearance
Full length header design for proven power gains
One piece header tubes / No slip tubes
Header Sets Include: 1/16" Header & Collector Gaskets, Header Bolts (16pcs) and Reducers/Adapters for hook-up to your Exhaust System.
Fits Applications:
- 1962-1965 "B"-bodies

62-65 "B"-body Hemi Headers		Footnotes (Click on number to open footnote)
Engine Size	426, 472 or 528 crate	19, 37, 39, 42
Cylinder Heads	OEM, Stage 5 (Low-port), Edelbrock (Standard Mopar Hd.)	14
Front Ends	Stock	33
Auto Trans	Yes	23
Standard Trans	Yes	53
Floor Shift	Yes	23
Column Shift	Yes	41
Push Button	Yes
Power Steering	Yes
Manual Steering	Yes
Air Conditioning	Yes
Starters	Listed Mini Starters only	10
Flywheel / Bellhousing	10.5" or 11"	28
Steering Linkage	OEM only	12, 33
Clutch Linkage	OEM only	22
Oil Filters	OEM
Oil Pans	OEM or Milodon	11
Valve Covers	OEM or Cast Aluminum

Coating Options	2-1/8" tubes Header Part No's	2-1/4" tubes Header Part No's	Price Footnotes
"Raw" (Bare Mild Steel)	Part # TTIHEMI625-218C0	Part # TTIHEMI625-214C0	$746 Footnote: C0
Nickel Chrome Plated	Part # TTIHEMI625-218C1	Part # TTIHEMI625-214C1	$766 Footnotes: 17, C1
Ceramic Coated with a Thermal Barrier	Part # TTIHEMI625-218C4	Part # TTIHEMI625-214C4	$921 Footnotes: 17, C4
Polished Ceramic Coated with a Thermal Barrier	Part # TTIHEMI625-218C5	Part # TTIHEMI625-214C5	$951 Footnotes: 17, C5

Prices do not include Shipping, Handling or California Sales Tax, if applicable. Prices subject to change without notice.

Click an image for a detailed view.

LH view

RH view

Starter Clearance

Dipstick

Angled Header Adapter kit

Footnote: 16

TTI Header Gasket

(.PDF)

Additional Options:

Tubes and Fittings can be installed prior to coating. These orders will be considered "Special Orders".

Please Note: TTI requires a $100 non-refundable deposit for all "Special Orders" prior to the start of your order.

The balance will be due upon completion of your order. Please allow 3-4 weeks additional time for the coating process.

O2 Sensor Bungs

- Steel Fittings

- 18mm threads

- Installed at 9 o'clock & 3 o'clock

Part # MISC-O2 $39 /set (Fittings + Installation)

Evacuation Kit

- Mr. Gasket Crankcase Evacuation System

- Chrome plated push-on valve cover breathers

- Breather grommets

- Check valves

- 3-1/2" long threaded tubes

Part # KIT-EV6002 $102.95 (Evac System + Installation of tubes)

Part # SP005 $75 /set (3-1/2" Threaded Tubes only + Installation of tubes)

EGT Probe Fitting

- Exhaust Gas Temperature fittings

- 1/8" pipe / Internal thread

Part # MISC-EGT $17.50 each fitting installed

When ordering, specify which cylinders you want fittings installed in.

Typical Installation: #1 cylinder 1" from flange and #8 cylinder 1" from flange.

Tube Technologies, Inc.

TTI Performance Exhaust & Headers

1555 Consumer Circle ● Corona, CA 92880

(951) 371-4878 ● Fax: (951) 371-6143

Designed and Maintained By: Tube Tech Inc.

Updated: January 06, 2012