TTi Hemi Raised Port Headers

Hemi Raised-Port Headers

Designed for Hemi blocks with Stage V (high-port) cylinder heads

Recommended for 600+ horsepower

TTI headers are constructed of 16 gauge mild steel tubing, mandrel bent on sophisticated computer controlled bending machines for precise fit and uninterrupted exhaust flow. The mandrel bending process maintains a constant inside diameter of the tube for a smoother finish with no restriction of flow and no crimping of the tubes.

2-1/4" O.D. tubes / 4" collectors
3/8" thick laser-cut header and collector flanges, contoured for a leak free fit
Above the steering center link design (under chassis) offers maximum header to ground clearance
Full length header design for proven power gains
One piece header tubes / No slip tubes
Header Sets Include: 1/16" Header & Collector Gaskets, Header Bolts (16pcs) and Reducers/Adapters for hook-up to your Exhaust System.

Fits Applications:

1966-1974 "B"-bodies

1970-1974 "E"-bodies

Hemi Raised Port Headers Designed for Hemi blocks with Stage V (high-port) cylinder heads		Footnotes (Click on number to open footnote)
Engine Size	426 or 528 crate	19, 37, 39
Cylinder Heads	Stage V (high-port) / Keith Black	14
Front Ends	Stock	33
Auto Trans	Yes	23
Standard Trans	Yes	53
Floor Shift	Yes	23
Column Shift	Yes	41
Push Button	Yes
Power Steering	No
Manual Steering	Yes
Air Conditioning	Yes
Starters	Must use listed starters only	10
Flywheel / Bellhousing	10.5" or 11"	28
Steering Linkage	OEM only	12, 33
Clutch Linkage	OEM only	22
Oil Filters	OEM
Oil Pans	OEM or Milodon	11

Coating Options	Header Part No's	Price
"Raw" (Bare Mild Steel)	TTISTG5-214C0	$746 Footnote: C0
Nickel Chrome Plated	TTISTG5-214C1	$766 Footnotes: 17, C1
Ceramic Coated with a Thermal Barrier	TTISTG5-214C4	$921 Footnotes: 17, C4
Polished Ceramic Coated with a Thermal Barrier	TTISTG5-214C5	$951 Footnotes: 17, C5

Prices do not include Shipping, Handling or California Sales Tax, if applicable. Prices subject to change without notice.

Click an image for a detailed view.

TTi Header Gasket

#GA-HG24-STG5

Header Reducer / Adapter kit

Footnote: 16

Header Bolts

3/8 - 16x1 zinc plated

(22 supplied w/ headers)

Installation Instruction

(.pdf format)

Additional Options:

Tubes and Fittings can be installed prior to coating. These orders will be considered "Special Orders".

Please Note: TTI requires a $100 non-refundable deposit for all "Special Orders" prior to the start of your order.

The balance will be due upon completion of your order. Please allow 3-4 weeks additional time for the coating process.

O2 Sensor Bungs

- Steel Fittings

- 18mm threads

- Installed at 9 o'clock & 3 o'clock

Part # MISC-O2 $39 /set (Fittings + Installation)

Evacuation Kit

- Mr. Gasket Crankcase Evacuation System

- Chrome plated push-on valve cover breathers

- Breather grommets

- Check valves

- 3-1/2" long threaded tubes

Part # KIT-EV6002 $102.95 (Evac System + Installation of tubes)

Part # SP005 $75 /set (3-1/2" Threaded Tubes only + Installation of tubes)

EGT Probe Fitting

- Exhaust Gas Temperature fittings

- 1/8" pipe / Internal thread

Part # MISC-EGT $17.50 each fitting installed

When ordering, specify which cylinders you want fittings installed in.

Typical Installation: #1 cylinder 1" from flange and #8 cylinder 1" from flange.

Tube Technologies, Inc.

TTI Performance Exhaust & Headers

1555 Consumer Circle ● Corona, CA 92880

(951) 371-4878 ● Fax: (951) 371-6143

Designed and Maintained By: Tube Tech Inc.

Updated: January 06, 2012