LX/LC 5.7 / 6.1 V8 HEMI's

Stainless Headers & Dual Exhaust Systems

Mopar Magazine Article

Doug Duell's modern day Dodge Challenger drag car,

first ever to compete & win in an NHRA national event.

Class champion Chris Wheatcraft.

Charlie Wheatcraft Dragster

HEADERS

5.7 1-7/8"

6.1 1-7/8"

6.1 Step 1-7/8" x 2"

DRAG PACK HEADERS

Step 1-7/8" x 2"

2.0"

3" EXHAUST SYSTEMS

From Headers back

From Factory pipes back

POLISHED EXHAUST TIPS

Round

Challenger Style

Cuda Style

EXHAUST COMPONENT PARTS

X-Pipe Mid-Section w/ Cats

Mid- pipe w/ Cats

Mid-pipe without Cats

Cat Back pipe

Mufflers

Dual Tailpipes

O2 Sensor Extension Harness

Header Gaskets

Clamps

Dyno Results

Factory system vs. TTi 1-7/8" Headers & Exhaust System

Horse Power

25whp peak gain, with close

to 40whp in midrange.

Click to view

Torque

Close to 50lb/ft gain at

4200 rpm with 35lb/ft peak gain.

Click to view

DISCLAIMER

These products are intended for racing and off-road applications. Not legal for sale or use in California, nor in states which have adopted California emission standards.

5.7 1-7/8" HEADERS

Fits:

5.7L V8 Hemis

2005-2010 Chrysler 300, Charger, Magnum

2008-2011 Challenger

Features:

1-7/8" Header tubes

Ball flange connection with 3" 3-bolt floating flange

3/8" thick laser-cut header & collector flanges

Made from aircraft quality 304 stainless tubing (.065 wall)

Mandrel bent for a precise fit and uninterrupted exhaust flow

Proven horse power and torque

Bolt-on installation

Includes:

Header Gaskets (1) #GA-HG61 & (1) #GA-HG57RS

(16pcs) Zinc Plated 8mm Header Bolts 1.25 x 25mm #BO125

Dip Stick Spacer #DSS145

(18pcs) Hardware Kit - Socket head cap screws, Lock nuts & Flat washers #BO38CS

Coating Options:

Part No's:

Prices:

Raw Stainless	Ceramic Coated (Gray Satin Finish)	Polished Ceramic Coated (High-luster Finish)
# TTi 57H178-C0	# TTi 57H178-C2	# TTi 57H178-C3
$ 853	$ 952	$ 982

Prices do not include Shipping, Handling or California Sales Tax, if applicable. Prices subject to change without notice.

6.1 1-7/8" HEADERS

Fits:

6.1L V8 Hemis

2005-2010 Chrysler 300, Charger, Magnum

2008-2011 Challenger

Features:

1-7/8" Header tubes

3" ball-joint collectors with 3-bolt floating flange

3/8" thick laser-cut header & collector flanges

Made from aircraft quality 304 stainless tubing (.065 wall)

Mandrel bent for a precise fit and uninterrupted exhaust flow

Proven horse power and torque

Bolt-on installation

Includes:

(2) Header Gaskets #GA-HG61

(16pcs) Zinc Plated 8mm Header Bolts 1.25 x 25mm #BO125

(18pcs) Hardware Kit - Socket head cap screws, Lock nuts & Flat washers #BO38CS

Coating Options:

Part No's:

Prices:

Raw Stainless	Ceramic Coated (Gray Satin Finish)	Polished Ceramic Coated (High-luster Finish)
# TTi 61H178-C0	# TTi 61H178-C2	# TTi 61H178-C3
$ 853	$ 952	$ 982

Prices do not include Shipping, Handling or California Sales Tax, if applicable. Prices subject to change without notice.

6.1 "Step" HEADERS

Fits:

6.1L V8 SRT-8 Hemis

2005-2010 Chrysler 300, Charger, Magnum

2008-2011 Challenger

Features:

1-7/8" primary tubes, steps-up to 2" seconary tubes

3" ball-joint collectors with 3-bolt floating flange

3/8" thick laser-cut header & collector flanges

Made from aircraft quality 304 stainless tubing (.065 wall)

Mandrel bent for a precise fit and uninterrupted exhaust flow

Proven horse power and torque

Bolt-on installation

Includes:

(2) Header Gaskets #GA-HG61

(16pcs) Zinc Plated 8mm Header Bolts 1.25 x 25mm #BO125

(18pcs) Hardware Kit - Socket head cap screws, Lock nuts & Flat washers #BO38CS

Coating Options:

Part No's:

Prices:

Raw Stainless	Ceramic Coated (Gray Satin Finish)	Polished Ceramic Coated (High-luster Finish)
# TTi SRT81782-C0	# TTi SRT81782-C2	# TTi SRT81782-C3
$ 961	$ 1076	$ 1106

Prices do not include Shipping, Handling or California Sales Tax, if applicable. Prices subject to change without notice.

DRAG PACK "Step" HEADERS

Fits:

6.1L V8 SRT-8 Hemis

Features:

1-7/8" primary tubes, steps-up to 2" secondary tubes

4" O.D. Merge collectors / slip-on style

3/8" thick laser-cut, chrome plated, leak-proof flanges (Lightened)

Made from aircraft quality 304 stainless tubing (Light-weight .035 wall)

O2 Sensor bosses installed in left & right collectors

Mandrel bent for a precise fit and uninterrupted exhaust flow

Proven horse power and torque

Bolt-on installation

Special Order: Please allow 6-8 weeks fabrication time.

Includes:

(2) Header Gaskets #GA-HG61

(16pcs) Zinc Plated 8mm Header Bolts 1.25 x 25mm #BO125

Coating Options:

Part No's:

Prices:

Raw Stainless	Ceramic Coated (Gray Satin Finish)	Polished Ceramic Coated (High-luster Finish)
# TTi 61HR-178C0	# TTi 61HR-178C2	# TTi 61HR-178C3
$ 2318	$ 2416	$ 2446

Prices do not include Shipping, Handling or California Sales Tax, if applicable. Prices subject to change without notice.

DRAG PACK 2" HEADERS

Fits:

6.1L V8 SRT-8 Hemis

Features:

2" Header tubes

4" O.D. Merge collectors / slip-on style

3/8" thick laser-cut, chrome plated, leak-proof flanges (Lightened)

Made from aircraft quality 304 stainless tubing (Light-weight .035 wall)

O2 Sensor bosses installed in left & right collectors

Mandrel bent for a precise fit and uninterrupted exhaust flow

Proven horse power and torque

Bolt-on installation

Special Order: Please allow 6-8 weeks fabrication time.

Includes:

(2) Header Gaskets #GA-HG61

(16pcs) Zinc Plated 8mm Header Bolts 1.25 x 25mm #BO125

Coating Options:

Part No's:

Prices:

Raw Stainless	Ceramic Coated (Gray Satin Finish)	Polished Ceramic Coated (High-luster Finish)
# TTi 61HR-C0	# TTi 61HR-C2	# TTi 61HR-C3
$ 2318	$ 2416	$ 2446

Prices do not include Shipping, Handling or California Sales Tax, if applicable. Prices subject to change without notice.

3" EXHAUST SYSTEMS

FROM "TTi HEADERS" TO REAR OF CAR

Fits:

2005-2010 Chrysler 300, Charger, Magnum

2008-2011 Challenger

Features:

3" O.D. aircraft quality 304 stainless tubing (.065 wall)

Mandrel bent for a precise fit and uninterrupted exhaust flow

Proven horse power and torque

Bolt-on installation

Includes:

3" X-Pipe Mid-Section / (4) O2 Sensor bungs welded on each end of cats, (2) High flow catalytic convertors, (4) 3” Stainless band clamps, (4) O2 Sensor extension harnesses (2) 12" & (2) 24"

Magnaflow Mufflers / Offset inlet - Center outlet, 5x8 Oval, 24" overall length

Tailpipes / (2) Stainless band clamps. All necessary hangers welded on each side

Optional:

Polished Exhaust Tips

Application:

Part No's:

Prices:

2005-2010 Chrysler 300, Charger, Magnum	2008-2011 Challenger
# MA30HWCM	# CH30HWCM
$ 1739	$ 1739

Prices do not include Shipping, Handling or California Sales Tax, if applicable. Prices subject to change without notice.

3" EXHAUST SYSTEMS

FROM "FACTORY PIPES" TO REAR OF CAR (Factory Pipes: Cats + Tubes around trans)

Fits:

2005-2010 Chrysler 300, Charger, Magnum

2008-2011 Challenger

(Factory Pipes: Cats + Tubes around trans)

Features:

3" O.D. aircraft quality 304 stainless tubing (.065 wall)

Mandrel bent for a precise fit and uninterrupted exhaust flow

Proven horse power and torque

Bolt-on installation

Includes:

Cat Back Pipe / (4) 3” Stainless band clamps

Magnaflow Mufflers / Offset inlet - Center outlet, 5x8 Oval, 24" overall length

Tailpipes / (2) Stainless band clamps. All necessary hangers welded on each side

Optional:

Polished Exhaust Tips

Application:

Part No's:

Prices:

2005-2010 Chrysler 300, Charger, Magnum	2008-2011 Challenger
# MA30CBWM	# CH30CBWM
$ 1075	$ 1075

Prices do not include Shipping, Handling or California Sales Tax, if applicable. Prices subject to change without notice.

POLISHED EXHAUST TIPS

*Exhaust Tips

High quality 304 stainless investment cast reproduction tips

Polished to a mirrored finish

3" I.D. Slip-on clamp design

Includes: (2) stainless band clamps

Application:

Part No's:

Prices:

2005-2010 Chrysler 300, Charger, Magnum		2008-2011 Challenger
	9" Round		8"x 2" Challenger Style	6-3/4"x 2" Cuda Style
	# TIP30MA		# TIP30SRT	# TIP30-09CU
	$ 141 /set		$ 424 /set	$ 424 /set

Prices do not include Shipping, Handling or California Sales Tax, if applicable. Prices subject to change without notice.

COMPONENT PARTS

3" X-PIPE MID-SECTION

Made from 304 Stainless Steel
(4) O2 Sensor bungs welded on each end of cats
(2) Magna Flow Catalytic convertors
(4) 3" Stainless band clamps
(4) O2 Sensor extension harnesses (2) 12" & (2) 24"

Application	Length	Part No's	Price
05-10 Chrysler 300, Charger, Magnum	44"	# CH30HXP	$ 965
08-11 Challenger	49"	# MA30HXP	$ 965

MID-PIPE with CATS

Made from 304 Stainless Steel
Socket inlet with 3" 3-bolt floating flange
(2) Magna Flow Catalytic convertors
(4) O2 Sensor bungs welded in standard locations, (1) Extra for AF gauge
(4) O2 Sensor extension harnesses (2) 12" & (2) 24"

Size	Part No's	Price
3" O.D. inlet x 2.50" O.D. outlet	# MCHB25WC	$ 752
3" O.D. inlet x 2.70" O.D. outlet	# MCHB27WC	$ 752
3" O.D. inlet x 3.00" O.D. outlet	# MCHB30WC	$ 752

MID-PIPE without CATS

Made from 304 Stainless Steel
Socket inlet with 3" 3-bolt floating flange
(4) O2 Sensor bungs welded in standard locations, (1) Extra for AF gauge
(4) O2 Sensor extension harnesses (2) 12" & (2) 24"

Size	Part No's	Price
3" O.D. inlet x 2.50" O.D. outlet	# MCHB25	$ 352
3" O.D. inlet x 2.70" O.D. outlet	# MCHB27	$ 352
3" O.D. inlet x 3.00" O.D. outlet	# MCHB30	$ 352

3" CAT BACK PIPE

Made from 304 Stainless Steel
Inlet swedged & notched / Available in 2.510 I.D. or 2.710 I.D.
Outlet 3" O.D.
(4) 3" Stainless band clamps

Application	Size / Length	Part No's	Price
05-10 Chrysler 300, Charger, Magnum	2.510" I.D. inlet / 38"	# MA30XP25	$ 301
05-10 Chrysler 300, Charger, Magnum	2.710" I.D. inlet / 38"	# MA30XP27	$ 301
08-11 Challenger	2.510" I.D. inlet / 33"	# CH30XP25	$ 301
08-11 Challenger	2.710" I.D. inlet / 33"	# CH30XP27	$ 301

3" DUAL REAR EXIT TAILPIPES

Made from 304 Stainless Steel
3" O.D.
Hangers welded in factory hanger locations

Part No's	Price
# CH30TP	$ 364

3" MAGNAFLOW MUFFLERS

Satin Stainless Steel
5" x 8" Oval
3" offset inlet / 3" center outlet
18" body length
24" overall length

Part No's	Price
# MAG12259	$ 205 /ea.

HEADER GASKETs

5.7 Header (Left)
6.1 Headers (Left & Right)

Part No's	Price
# GA-H61	$ 12 /ea.

5.7 Header (Right)

Part No's	Price
# GA-H61RM	$ 12 /ea.

O2 SENSOR EXTENSION HARNESS

12" or 24"

Size	Part No's	Price
12"	# CHO2X12	$ 22 /ea.
24"	# CHO2X24	$ 31 /ea.

O2 SENSOR EXTENSION HARNESS

Available in 2.5" or 3.0"

Size	Part No's	Price
2.5"	# CL-TB25	$ 6 /ea.
3.0"	# CL-TB30	$ 6 /ea.

Prices do not include Shipping, Handling or California Sales Tax, if applicable. Prices subject to change without notice.

Tube Technologies, Inc.

TTI Performance Exhaust & Headers

1555 Consumer Circle ● Corona, CA 92880

(951) 371-4878 ● Fax: (951) 371-6143

Designed and Maintained By: Tube Tech Inc.

Updated: July 26, 2012