TTi Performance Exhaust and Headers     Est. since 1988

   

Home        Ordering Information         Shipping Rates         Authorized Distributors         Contact Us

 
 

Headers

MOPAR CLASSICS:  62-79 A,B,C,E,F,M

 Poly Headers:  318

 Small Block Headers:  273, 318, 340, 360

 B-Engine Headers:  383, 400

 RB-Engine Headers:  440, 413, 426

 Gen2 Hemi Headers:  426, 472, 528

  Gen3 Hemi Headers:  5.7, 6.1, 6.4

 

LATE-MODELS 

05-16 Challenger, Charger, Chrysler 300, 

Magnum, Scat Pack, Hellcat, Drag-Pak

  LX-Platform 5.7, 6.1, 6.4L Hemi Headers

 

RAM TRUCKS

03-08  1500, 2500

  5.7L Hemi Truck Headers

 

NEONS

94-05  SOHC, DOHC 

  2.0L V4 Headers

 

Exhaust Systems

MOPAR CLASSICS

62-79 A,B,C,E

  2.5", 3.0" Exhaust Systems

  3.0" Max Wedge Exhaust Systems

 

LATE-MODELS 

05-16 Challenger, Charger, Chrysler 300, 

Magnum, Scat Pack, Hellcat, Drag-Pak

  3.0" Exhaust Systems & Components

 

RAM TRUCKS

03-08  1500, 2500

  3.0" Exhaust Systems

 

NEONS

94-05  SOHC, DOHC 

  2.5" Exhaust Systems

 

Components, Accessories

& Replacement parts

MOPAR CLASSICS

62-79 A,B,C,E

  727 Trans, Shifter mounting bracket

  Body brackets, muffler hanger

  Crossmember, modified

  Exhaust-pipes (Head pipes)

  Gaskets / Flanges

  Hangers, Muffler

  Hangers, Tailpipe receptacle

  Hardware:  Bolts, Clamps

  Header reducer adapters

  H-pipe midsection assemblies

  Insulators, Rubber bracket hanger

  Motor mounts, Spool mounts

  Mufflers

  Oil filter blocking plate

  Spark plug wrench

  Tailpipes, Over-axle

  Tips, Challenger-style

  Tips, Cuda-style

  Tips, Plymouth oval

  Tips, Dodge rectangle

  Tips, Slotted with colored inserts,

     71-7 Dodge, 73-74 Plymouth

  Tips, turndown extensions

  Torque shaft assembly (Column shift)

  X-pipe midsection assemblies

  Z-bars, A-body (Standard Trans)

 

LATE-MODELS 

05-16 Challenger, Charger, Chrysler 300, 

Magnum, Scat Pack, Hellcat, Drag-Pak

  Catalytic converter with elbows

  Hardware:  Bolts, clamps

 Gaskets / Flanges

  Hardware:  Bolts, clamps

  Header-pipes

  O2 Sensor wire extension harnesses

  Tailpipes

  Tips, Polished

  X-pipe assemblies

  X-pipe crossover

 

RAM TRUCKS

03-08  1500, 2500

  Adapters, header

  Fuel line insulation materials

  Gaskets / Flanges

  Hardware:  Bolts, clamps

  Intermediate-pipes

  Muffler, HP

  O2 Sensor wire extension harnesses

  Tailpipes, Over-axle

  Tips, Polished

  Y-pipe Assemblies

 

NEONS

94-05  SOHC, DOHC 

  Air filter

  Adapters, exhaust system

  Catalytic converter with extension-pipes

  Gaskets / Flanges

  Hardware:  Bolts, clamps, insulators

  Hose sleeve, heat-resistant

  Intake system, SOHC cold air

  Intake tube, SOHC cold air

  Motor mount, Front

  Strut bars

  Tip, polished

 

 

 

   

Home  <  440, 413, 426 RB-Engine Header Options  <  440BR:  2-1/8" B1/B1BS Step Headers

MOPAR CLASSICS:  B,E-bodies

 

Header #440BR-218

2-1/8" B1/B1BS STEP HEADERS

 

FEATURES ...

Designed for:  B1BS Sportsman, Brodix B1BS & Koffel's Original B1 cylinder heads.

Primary tube size:  2" O.D.

Secondary tube size:  2-1/8" O.D.

Collector size:  3.5" with 3.5" 3-bolt flange.

Flanges:  3/8" thick, laser-cut, contoured for a leak free fit

Material:  Constructed of 16 gauge mild steel tubing.  Mandrel bent on sophisticated computer controlled bending machines for precise fit and uninterrupted exhaust flow. The mandrel bending process maintains a constant inside diameter of the tube for a smoother finish with no restriction of flow and no crimping of the tubes.

Step design:  Provides low-end response and top-end horsepower gain.

One piece design:  One piece header tubes / No slip tubes.

Under chassis design:  Above the steering center link design offers maximum header to ground clearance.

Full length header design:  Proven power gain vs. shorty design.

Recommended for:  600+ horsepower.

Torsion bar removal:  Not required.

Header set includes:  Header gaskets, 12 header bolts, header reducer adapters with 3-bolt gaskets & hardware.

APPLICATIONS

PART NO'S & PRICING

COMPONENT PARTS

OPTIONAL: O2, EVAC, EGT

 

~  Our headers were designed to fit with the engines located to the factory specifications.  If the engine is not located correctly in the chassis, the headers will not fit properly.  We strongly suggest you check your engine location prior to installation.

~  Due to various manufacturing designs, aftermarket parts, engine configurations, suspension combinations, etc... TTi cannot ensure headers and exhaust systems to fit all combinations.  However, we have done our best to accommodate both factory and aftermarket component combinations.  In some cases, slight modification or repositioning may be required on your part to clear the specific situation.

 

APPLICATION   Verify headers will fit your application combinations...

Platform:

62-74 B-BODY and 70-74 E-BODY CHASSIS.

[Check your engine location:  See FN39 for the factory dimensions]

(!) 67-76 A-body:  These headers will not fit A-body applications without extensive modifications.  TTi does not offer services for these types of modifications.  Please read all fitment notes.

Engine size:

440 RB, 413-426 WEDGE

Cylinder heads:

 

Cylinder head must be stated when ordering.

 

B1BS SPORTSMAN

BRODIX B1BS

KOFFELS'S ORIGINAL B1

Cylinder Head Studs:  

Head studs may be used on the Passenger-side, however, the header tubes will not clear the cylinder head studs below the #3, #5 and #7 cylinders on the Drivers-side.  We recommend ARP bolts for clearance in these areas.

Spark Plugs:

STRAIGHT or ANGLED

Headers are designed with adequate plug clearance for angled plugs.

Front Suspension:

STOCK with torsion bars.

COILOVER without torsion bars:  RMS Alterktion, Magnumforce XRT Tubular or Control Freak IFS.

(!) 67-76 A-body:  A coilover suspension must be used.  Regardless, these headers will not fit A-body applications without extensive modifications.

Steering Linkage:

OEM with torsion bars or Rack & Pinion without torsion bars.

Note:  Headers will not clear UniSteer Performance Rack and Pinion.  [See FN33 for clearance dimensions]

Engine Mounts:

OEM, Schumacher or equivalent.

Auto Trans:

YES  

Note:  Some applications with a floor shifter may require the adjustable swivel & the lower rod to be re-positioned to clear the header collector.  [See FN23 for illustration]

Note:  Applications with a 3-section throttle rod will require modification to the bell-crank & pivot shaft.  [See FN36 for illustration & modification]

Standard Trans:

YES

Keisler Tremec TKO-500/600 Transmissions:  It is imperative that the output-end of the tail shaft is in exactly the same position as the stock transmission output shaft for the headers to fit properly.

(!) 67-76 A-body:  A modified Z-bar will be required.  Sold separately, Part #ZB307 Regardless, these headers will not fit A-body applications without extensive modifications.

Flywheel:

10.5" 130-tooth ring gear.

11" 143-tooth ring gear must use a RobbMc Performance starter, part #3005.

Clutch Linkage:

OEM

Floor Shift:

YES

Note:  Some applications with an auto transmission may require the adjustable swivel & the lower rod to be re-positioned to clear the header collector.  [See FN23 for illustration]

Column Shift:

NO

Note:  To achieve column shift clearance, modification will be required to your shift linkage.  TTi does not make a linkage to satisfy this situation.

Push Button:

YES

Manual Steering:

YES  

(!) 67-76 A-body:  Extensive modification to the steering column is require to clear the #7 cylinder tube.  TTi does not offer services for this type of modification.

Power Steering:

YES

Air Conditioning:

YES  

Starters:

MINI STARTERS

Chrysler part no's:  R53005984, 56027702AC

Mopar Performance part no's:  P5249644AB, P5007860, P4286522

PowerMaster Performance XS torque starter no:  9523

Note:  Applications using Edelbrock Victor, Procomp or Stage 6 cylinder heads, must use a RobbMc Performance starter, part #3005.

Bellhousing:

ALL  

Note:  Lakewood Bellhousing Scatter Shield, slight modification required.  [See FN28 for modification]

Oil Filters:

OEM

Oil Pans:

OEM, MILODON

Milodon street & strip part no's:  30930, 30931, 31010

Milodon road race part no's:  31580, 31581

Valve Covers:

OEM, CAST ALUMINUM, STAMPED STEEL, FABRICATED ALUMINUM

 

PART NO'S & PRICING ...

HEADER FINISH     [See Coating Options for details]

PART NO.

PRICE

RAW

Bare mild steel.

TTi 440BR-218C0

$ 733.00 set

NICKEL CHROME plated, exterior only

Shiny finish, susceptible to bluing.

TTi 440BR-218C1

$ 754.00 set

CERAMIC COATED with a thermal barrier

Silver matte finish.

TTi 440BR-218C4

$ 918.00 set

POLISHED CERAMIC COATED with a thermal barrier

Silver high-luster show finish.

TTi 440BR-218C5

$ 950.00 set

  • Header sets include:  Header gaskets, 12 header bolts, header reducer adapters with 3-bolt gaskets & hardware.

  • Ceramic coating / First engine run warning  [See FN17 for suggestion]

  • Coupled with a TTi Exhaust Systems these headers become even more efficient!  [Click here to see exhaust systems]

  • Prices do not include Shipping, Handling or California Sales Tax, if applicable.  Prices subject to change without notice.

DRIVERS-SIDE

Dimensions: 43" width x 18" tall

PASSENGER-SIDE

Dimensions: 42" width x 18" tall

 

INSTALLATION INSTRUCTIOS

To view and print PDFs, you must have a supported version of Adobe's Acrobat Reader installed.  This program is available for free, download by going directly to Adobe.com

 

COMPONENT and REPLACEMENT PARTS ...

 

Description

 

Part No.

Price

 

PLUG WRENCH    

Designed for easier access of tightening and removing spark plugs when running a Brodix B1BS cylinder head.

# 20003

$ 42.00 each

 

 

B, RB & HEMI BLOCK Z-BAR FOR 67-76 A-BODIES WITH STANDARD TRANSMISSION  

Modified design Z-bar.  more info...

Note:  TTi does not make a modified Z-bar for all header/vehicle application combinations.

# ZB307

$ 110.00 each

 

 

HEADER GASKETS 

HTX-900 gasket:  A high density non-asbestos fiber metal core composite consisting of graphite-coated, high-temperature facing material chemically and mechanically fused to an expanded steel core.  more info...

Port size: 2" X 1-5/8"

Recommendation:  Use a very thin layer of High-Temp Silicone Sealer on each side of gasket.

Note:  (2) Supplied with header purchase.

# GA-HG440

$ 26.30 set

 

 

HEADER BOLTS

3/8-16x1 GR5 zinc plated.

Note:  (12) Supplied with header purchase.

# BO38

$ .62 each

 

 

3.5" 3-BOLT COLLECTOR GASKET    

HTX-900 gasket:  A high density non-asbestos fiber metal core composite consisting of graphite-coated, high-temperature facing material chemically and mechanically fused to an expanded steel core.  more info...

Recommendation:  Use a very thin layer of High-Temp Silicone Sealer on each side of gasket.

Note:  (2) Supplied with header purchase.

# GA-RG35

$ 4.35 each

 

 

HEADER REDUCER ADAPTERS for 67-76 A-body, 66-74 B-body & 70-74 E-body applications.

Made of 16 gauge aluminized tubing, 3/8" thick flanges, includes 3-bolt gaskets & hardware.

Note:  (1 set) Supplied with header purchase.  Size required when ordering.

   

 

3.5" x 2.5" x 6" long reducers

# RED35X25X6

$ 54.50 set

 

3.5" x 3.0" x 6" long reducers

# RED35X30X6

$ 54.50 set

 

3.5" x 3.5" x 6" long adapters

# RED35X35X6

$ 54.50 set

 

 

HEADER REDUCER ADAPTERS for 62-65 B-body applications

Made of 16 gauge aluminized tubing, 3/8" thick flanges, includes 3-bolt gaskets & hardware.

Note:  (1 set) Supplied with header purchase.  Size required when ordering.

   

 

3.5" x 2.5" pre-bent design reducers

# RED35X25B6265

$ 54.50 set

 

3.5" x 3.0" pre-bent design reducers

# RED35X30B6265

$ 54.50 set

 

 

ADDITIONAL OPTIONS ...

O2 Sensor bungs, Evacuation tubes and EGT probe fittings can be installed prior to coating headers.  Installation of these options are considered a "Special Order".  Please allow an additional 3-4 weeks for the special order work and the coating process.

Note:  TTi requires a $100 non-refundable deposit for all Special Orders prior to the start of your order, the balance will be due upon completion.

 

Description

Part No.

Price

O2 SENSOR BUNGS + INSTALLATION

Steel fitting, 18mm threads, installed in the header collectors or reducer adapters.

Installation locations:  Drivers-side, 9 o'clock / Passenger-side, 3 o'clock.

   

 

Installed in Header Collectors...

 

Installed in Reducer Adapters...

# MISC-02COL

# MISC-02RED

$ 51.50 set

$ 51.50 set

 

 

 

 

EVACUATION TUBE

1/2" pipe, 3.5" long, external thread, cut at 45 angle.

# 5015

$ 18.55 each

EVACUATION TUBE + INSTALLATION

Evacuation tube installed in the header collectors.

Installation locations:  Drivers-side, 9 o'clock / Passenger-side, 3 o'clock.

# SP005

$ 87.50

CRANKCASE EVACUATION SYSTEM KIT + TUBE INSTALLATION

Includes Allstar Performance Crankcase Evacuation System:  2 chrome plated push-on valve cover breathers, breather grommets, check valves and 3.5'' threaded tubes.*

* The 3.5" long threaded tubes will be used from the kit and installed in the header collectors.  Installation locations:  Drivers-side, 9 o'clock / Passenger-side, 3 o'clock.

# KIT-EV34145

$ 109.20

 

 

EGT PROBE FITTING + INSTALLATION

304SS Exhaust gas temperature fitting, 1/8" pipe, Internal thread, typical installed 1" from the header flange.

(!) When ordering, specify which cylinder tubes.

# MISC-EGT

$ 51.50 1st fitting

$ 10.00 each additional fitting installed.

 

Updated: July 17, 2017

 

TUBE TECHNOLOGIES, INC.

TTi Performance Exhaust and Headers

1555 Consumer Circle

Corona, CA 92880-1726 USA

(Manufacturing plant and Distribution center)

Phone (951)371-4878   Fax (951)371-6143

Phone hours:  Mon-Fri, 8am-4pm PST