• 

• ---

• Due to the numerous engine configurations and suspension combinations, TTi cannot ensure headers and exhaust to fit all combinations, however, we have done our best to accommodate both factory and aftermarket component combinations.  e.g. Engine blocks, cylinder heads, starters, valve covers, etc.

  ---

   

• Applications Click number to read footnotes for further information, illustrations and/or modification instructions...  Application Footnotes Platforms: 62-74 B-body and 70-74 E-body chassis     Engine Size: 413, 440, 426 wedge, Indy-Maxx block, World Alum block   37,  39 Cylinder Heads: INDY-572-13   14,  37,  39,  49, Spark Plugs: ANGLED     Suspension: STOCK with torsion bars COILOVER without torsion bars:  RMS Alterktion, Magnumforce XRT Tubular or Control Freak.     Auto Trans: YES   ...applications with a floor shifter will require modification to the torque shaft lever, see footnote 23 Applications with a 3-section throttle rod will require modification to the bell-crank & pivot shaft, see footnote 36   23,  36,  53 Standard Trans: YES   53 Floor Shift: YES   ...Auto Trans applications will require modification to the torque shaft lever, see footnote 23   23 Column Shift: NO   ...To achieve column shift clearance, modification will be required to your shift linkage   41 Push Button: YES     Manual Steering: YES     Power Steering: YES     Air Conditioning: YES     Starters: Chrysler mini starters:  R53005984, 56027702AC Mopar Performance starters:  P5249644AB, P5007860, P4286522 PowerMaster XS Torque starters:  9523     Flywheel: 10.5" 130-tooth ring gear or 11" 143-tooth ring gear     Bellhousing: ALL   ...Lakewood Bellhousing Scatter Shield see footnote for modification   28 Oil Filters: N/A     Oil Pans: OEM, Milodon, Charlie's   11 Clutch Linkage: OEM     Steering Linkage: OEM with torsion bars or Rack & Pinion without torsion bars Headers will not clear the uniSteer Performance Rack & Pinions. 62-66 B-body applications:  Headers will not clear Firm Feel fast ratio pitman & idler arm.   12,  33 Valve Covers: OEM, Cast aluminum, Stamped steel, Fabricated aluminum     Transmission Pan: Accommodates B&M deep sump pan #10280     Flex Plate Shield: Accommodates CSR Super Shield #836 Note:  A 727 Shifter Mounting Bracket will be required, sold separately.  Part #20002     Built to Order:  These headers are not built until a confirmed order is received.  Estimated production time: 8-10 weeks. Header Finish Part No. Price   Footnotes Raw (Bare Mild Steel) # TTi 440214MC-C0 $ 1444.50 /set   C0     Ceramic Coated with a Thermal Barrier # TTi 440214MC-C4 $ 1620.00 /set   17,  C4 Polished Ceramic Coated with a Thermal Barrier # TTi 440214MC-C5 $ 1655.00 /set   17,  C5 Header sets include:  Header gaskets, 12 header bolts, header reducer adapters with 3-bolt gaskets & hardware. Prices do not include Shipping, Handling or California Sales Tax, if applicable. Prices subject to change without notice. 727 Shifter Mounting Bracket ADDITIONAL COMPONENT PARTS Description   Part No. Price   SHIFTER MOUNTING BRACKET     more info... 727 rear mount bracket # 20002 $ 26.40 each     INDY HEADER GASKETS Port size: 2.200" x 1.820" # GA-HG440G1222 $ 33.98 /set     HEADER BOLT 3/8"-16x1 # BO38 $ .88 each     ADDITIONAL OPTIONS ... O2 Sensor bungs, Evacuation tubes and EGT probe fittings can be installed prior to coating headers.  Installation of these options are considered a "Special Order".  Please allow an additional 3-4 weeks for the special order work and the coating process. Note:  TTi requires a $100 non-refundable deposit for all Special Orders prior to the start of your order, the balance will be due upon completion.   Description Part No. Price O2 SENSOR BUNGS + INSTALLATION Steel fitting, 18mm threads, installed in the header collectors or reducer adapters. Installation locations:  Drivers-side, 9 o'clock / Passenger-side, 3 o'clock.     Installed in Header Collectors ... # MISC-02COL $ 117.38 /set  Installed in Drivers-side Header Collectors ... # MISC-02COL-DS $ 68.69 each  Installed in Reducer/Adapters ... # MISC-02RED $ 117.38 /set  Installed in Drivers-side Reducer/Adapters ... # MISC-02RED-DS $ 68.69 each           EVACUATION TUBE 1/2" pipe, 3.5" long, external thread, cut at 45º angle. # 5015 $ 19.80 pc. EVACUATION TUBE + INSTALLATION Installation locations:  Drivers-side, 9 o'clock / Passenger-side, 3 o'clock.     Evacuation tube installed in the header collectors ... # SP005-COL $ 87.50 /set Evacuation tube installed in the Reducer/Adapters ... # SP005-RED $ 87.50 /set       CRANKCASE EVACUATION SYSTEM KIT + TUBE INSTALLATION Includes Allstar Performance Crankcase Evacuation System:  2 chrome plated push-on valve cover breathers, breather grommets, check valves and 3.5'' threaded tubes.* * The 3.5" long threaded tubes will be used from the kit and installed in the header collectors.  Installation locations:  Drivers-side, 9 o'clock / Passenger-side, 3 o'clock. # KIT-EV34145 $ 110.55 Kit + Tube Installation

Updated: April 14, 2025