2-1/4" O.D. tubes with 4" 3-bolt collectors
Recommended for 600+ horsepower
Above the steering center link design offers maximum header to ground clearance
One piece header tubes / No slip tubes
Constructed of 16 gauge mild steel tubing
Mandrel bent on sophisticated computer controlled bending machines for precise fit and uninterrupted exhaust flow. The mandrel bending process maintains a constant inside diameter of the tube for a smoother finish with no restriction of flow and no crimping of the tubes.
3/8" thick laser-cut header flanges contoured for a leak free fit
3/8" thick laser-cut 3-bolt collector flanges
Coupled with a TTi Exhaust Systems these headers become even more efficient
Due to the numerous engine configurations and suspension combinations, TTi cannot ensure headers and exhaust to fit all combinations, however, we have done our best to accommodate both factory and aftermarket component combinations. e.g. Engine blocks, cylinder heads, starters, valve covers, etc.

Click number to read footnotes for further information, illustrations and/or modification instructions...

Application Footnotes

Applications:

66-74 B-bodies, 70-74 E-bodies

42, 39

Front Suspension:

STOCK or Equivalent, retaining torsion bars

Engine Size:

426, 472, 528 Hemi, Indy-Maxx block

19, 37, 39

Cylinder Heads:

Indy-426-1RA-Legend

14

Auto Trans:

YES   ...applications with a floor shifter will require modification to the torque shaft lever, see footnote 23
Note: Applications using the Keisler Auto Trans with the 5/8" spacer must use a PowerMaster XS Torque starter 9523

23, 53

Standard Trans:

YES

53

Floor Shift:

YES   ...Auto Trans applications will require modification to the torque shaft lever, see footnote 23

23

Column Shift:

NO   ...To achieve column shift clearance, modification will be required to your shift linkage

41

Push Button:

N/A

Manual Steering:

YES

Power Steering:

NO

Air Conditioning:

YES

Starters:

Chrysler mini starters: R53005984, 56027702AC
Mopar Performance starters: P5249644AB, P5007860, P4286522
PowerMaster XS Torque starter: 9523
Note: Applications using the Keisler Auto Trans with the 5/8" spacer must use a PowerMaster XS Torque starter 9523

Flywheel:

10.5" 130-tooth ring gear, 11" 143-tooth ring gear

Bellhousing:

ALL   ...Lakewood Bellhousing Scatter Shield see footnote for modification

28

Oil Filters:

OEM or Remote Mount

Oil Pans:

OEM, Milodon
Note: A flexible dipstick tube will be required to clear headers   ...see Milodon 22070

11

Clutch Linkage:

OEM   ...Hydraulic and mechanical Mopar clutch linkage systems can be used

Steering Linkage:

OEM
Fast Ratio Pitman & Idler Arms: NO
Note: Headers will not clear Unisteer rack and pinion

12, 33

Header Finish	Part No.	Price	Footnotes
Raw (Bare Mild Steel)	# TTi 528INDY-214C0	$ 949.00 set	C0
Nickel Chrome Plated	# TTi 528INDY-214C1	$ 1093.00 set	17, C1
Ceramic Coated with a Thermal Barrier	# TTi 528INDY-214C4	$ 1124.00 set	17, C4
Polished Ceramic Coated with a Thermal Barrier	# TTi 528INDY-214C5	$ 1159.00 set	17, C5

Prices do not include Shipping, Handling or California Sales Tax, if applicable.

Prices subject to change without notice.

Header sets include: Header gaskets, header bolts (18pcs), header reducer adapters with 3-bolt gaskets & hardware.

ADDITIONAL COMPONENT PARTS

Description

Part No.

Price

HEMI HEADER GASKETS more info...
Port size: 2.00 x 1.900	# GA-HG426	$ 30.95 /set

HEADER BOLT
3/8-16x1	# BO38	$ 0.91 each

3-BOLT COLLECTOR GASKETS more info...
4.0" I.D.	# GA-RG40	$ 7.14 each

HEADER REDUCER ADAPTERS To transition Exhaust system to Headers for 66-74 B-body & 70-74 E-body applications
4.0" x 3.0" x 6" long adapters	# RED40X30X6	$ 78.99 /set
4.0" x 3.5" x 6" long adapters	# RED40X35X6	$ 81.99 /set
4.0" x 4.0" x 6" long adapters	# RED40X40X6	$ 84.99 /set

ADDITIONAL OPTIONS...

• Evacuation tubes and EGT probe fittings can be installed prior to coating headers. Installation of these options are considered a "Special-Order". Please allow an additional 3-4 weeks for the special order work and the coating process.

• Special-Order Deposit Required: TTi requires a $50.00 non-refundable deposit for the following Special-Orders prior to the start of your order. The balance will be due upon completion.

DESCRIPTION	PART NO.	PRICE
O2 SENSOR BUNGS + INSTALLATION Steel fitting, 18mm threads, installed in the header collectors or reducer adapters. Installation locations: Drivers-side, 9 o'clock / Passenger-side, 3 o'clock.
Installed in Header Collectors ...	# MISC-02COL	$ 117.38 /set
Installed in Drivers-side Header Collectors ...	# MISC-02COL-DS	$ 68.69 each
Installed in Reducer/Adapters ...	# MISC-02RED	$ 117.38 /set
Installed in Drivers-side Reducer/Adapters ...	# MISC-02RED-DS	$ 68.69 each


EVACUATION TUBE + INSTALLATION • Evacuation tubes will be installed in the reducers or adapters • Drivers-side installed in the 9 o'clock location • Passenger-side installed in the 3 o'clock location
Evacuation tube installed in the header collectors ...	# SP005-COL	$ 87.50 /set
Evacuation tube installed in the header reducer adapters ...	# SP005-RED	$ 87.50 /set

CRANKCASE EVACUATION SYSTEM KIT + TUBE INSTALLATION

• Allstar Performance Crankcase Evacuation System: 2 chrome plated push-on valve cover breathers, breather grommets, check valves and 3.5'' threaded tubes

• The 3.5" long threaded tubes will be used from the kit and will be installed in the reducer or adapters

• Drivers-side installed in the 9 o'clock location

• Passenger-side installed in the 3 o'clock location

# KIT-EV34145

$ 110.55

Kit + Tube Installation

EGT PROBE FITTING + INSTALLATION

• 304SS exhaust gas temperature fitting, 1/8" pipe, internal thread

• Typical installed 1" from the header flange

• (!) Specify which cylinder tubes when ordering.

# MISC-EGT1	1st fitting $ 91.38
# MISC-EGT2	2nd fitting $ 107.76
# MISC-EGT3	3rd fitting $ 124.14
# MISC-EGT4	4th fitting $ 140.52
# MISC-EGT5	5th fitting $ 156.90
# MISC-EGT6	6th fitting $ 173.28
# MISC-EGT7	7th fitting $ 189.66
# MISC-EGT8	8th fitting $ 206.04

Updated: April 14, 2025

• About Us	• Coating Options	• Mopar Body Style ID	TUBE TECHNOLOGIES, INC. TTi Performance Exhaust & Headers 1555 Consumer Circle Corona, CA 92878-3226 Phone: (951) 371-4878 Fax: (951) 371-6143 Mon-Fri, 8am-4pm PST
• Contact Us	• Product Maintenance & Care	• Mopar Related Websites
• Ordering Information	• Limited Warranty	• Media / Published Articles
• Shipping Rates	• Illustration & Installation Instructions	• Warehouse Clearance
• Authorized Distributors	• FAQs

Designed and maintained by Tube Technologies, Inc.