62-65 B-body Exhaust Systems

2.	Header-back Exhaust Systems (Line B25-B47) • 62 Belvedere, Dart, Fury, Polara, Savoy Exhaust Systems • 62-65 Station-Wagon Exhaust Systems • 63-65 Belvedere, Coronet, Fury, Polara, Satellite, Savoy Exhaust Systems

EXHAUST SYSTEM DETAILS

Our performance exhaust systems are designed and fabricated in-house using sophisticated CNC machinery and mandrel bent for a precise fit and uninterrupted exhaust flow. Systems are constructed of 16 gauge aluminized tubing to resist heat and corrosion damage. Our high performance dual systems have proven to deliver more horsepower and torque over stock size exhaust systems while improving exhaust flow.

Exhaust-Pipes: Manifolds-back exhaust systems will include Exhaust-Pipes (aka Head-pipes) to bolt-up to the manifolds. When ordering, the 7-digit casting no's will be required.

Mid-pipe Designs: Exhaust systems are available with either an H-pipe or X-pipe mid-section assembly.

• The H-pipe design has proven to provide increased horsepower over the stock straight exhaust pipes.

• The X-pipe design has proven to improve power and sound tone compared to the traditional H-pipe design mid-section.

Mufflers: 62-65 B-body exhaust systems were designed using the Dynomax Super Turbo mufflers. Our personal preference due to the mild sound level, true performance tone, and minimal interior resonation noise compared to other mufflers.

When choosing to use mufflers other than the Dynomax Super Turbo, please note that modification may be required to the muffler slips for proper fit and alignment due to muffler case lengths and width differences. Modification may include cutting, welding, notching and adding material for additional length. Applications using mufflers longer than systems were design with, will require shortening the outlet end of the mid-pipe (H-or X). Using mufflers shorter than systems were designed with, will require adding additional material at the inlet end of the muffler. We offer pre-fabricated tube length extenders "Slip-Connectors" for additional material, sold separately.

• 2.5" Exhaust Systems designed with muffler #17748, offset inlet/center outlet, 4.25 x 9.75" canister, 25.5" overall length

• 3.0" Exhaust Systems designed with muffler #17793, offset inlet/center outlet, 5.50 x 11.0" canister, 23.0" overall length.

Muffler Hangers: Heavy-duty design, mounts to the supplied muffler hanger body brackets.

Over-Axle Tailpipes:

• 62 Belvedere, Fury, Polara, Savoy tailpipes are designed Turndown with a finished angle-cut. To run exhaust tips, cut-off the turndowns.

• 62-65 Station-Wagon tailpipes are designed side-exit with a blunt-cut.

• 63-65 Belvedere, Coronet, Fury, Polara, Satellite, Savoy tailpipes are designed Turndown with a finished angle-cut. To run exhaust tips, cut-off the turndowns.

Tailpipe Hanger Receptacles: Side frame rail mount design with rubber block insulator.

Installation: Bolt-on design, no welding required. Please read the installation instructions that are supplied with the exhaust system. We recommend starting the installation with the tailpipes working towards the engine.

1.	62-65 B-BODY MANIFOLDS-BACK EXHAUST SYSTEMS

Manifolds-back exhaust systems include

• Exhaust-Pipes (aka Head-pipes)

• Mid-Section Assembly (H-pipe or X-pipe design)

• Dynomax Super Turbo Mufflers (Available with or without)

• Muffler Hangers

• Muffler Hanger Body Brackets

• Over-Axle Tailpipes

• Tailpipe Hanger Receptacles

• Clamps & hardware necessary for the bolt-on installation

(!) Required when ordering: Left & right 7-digit manifold casting no's,

and Auto or Standard transmission

• Manifold casting no's list: 273-360 383-440 426-Hemi

(We mfg pipes to bolt-up to manifolds, we do not sell manifolds)

• Application Footnotes: 10, 57, 61

• Accessories & Component Parts

Mid-Pipe Design

Choose H or X

Mufflers

Choose with or without

Tailpipe Style

O.D.

Tube Size

Price

Manifolds-back systems

(Click P/N for illustration .PDF)

PART NO'S...

62 BELVEDERE, DART, FURY, POLARA, SAVOY

Line #

B1	H-pipe	with Mufflers	Turndown, angle-cut	2.5"	$ 948.95	P/N: B25 MWM62
B2	H-pipe	without Mufflers	Turndown, angle-cut	2.5"	$ 792.95	P/N: B25 MNM62
B3	H-pipe	with Mufflers	Turndown, angle-cut	3.0"	$ 1102.95	P/N: B30 MWM62
B4	H-pipe	without Mufflers	Turndown, angle-cut	3.0"	$ 864.95	P/N: B30 MNM62

B5	X-pipe	with Mufflers	Turndown, angle-cut	2.5"	$ 1004.95	P/N: XB25 MW62
B6	X-pipe	without Mufflers	Turndown, angle-cut	2.5"	$ 842.95	P/N: XB25 MN62
B7	X-pipe	with Mufflers	Turndown, angle-cut	3.0"	$ 1142.95	P/N: XB30 MW62
B8	X-pipe	without Mufflers	Turndown, angle-cut	3.0"	$ 918.95	P/N: XB30 MN62

*** Prices do not include Shipping, Handling or California Sales Tax, if applicable ***

Prices subject to change without notice.

62-65 STATION-WAGONS

Line #

B9	H-pipe	with Mufflers	Side-exit, blunt-cut	2.5"	$ 948.95	P/N: B25 MWM6265-W
B10	H-pipe	without Mufflers	Side-exit, blunt-cut	2.5"	$ 792.95	P/N: B25 MNM6265-W
B11	H-pipe	with Mufflers	Side-exit, blunt-cut	3.0"	$ 1102.95	P/N: B30 MWM6265-W
B12	H-pipe	without Mufflers	Side-exit, blunt-cut	3.0"	$ 864.95	P/N: B30 MNM6265-W

B13	X-pipe	with Mufflers	Side-exit, blunt-cut	2.5"	$ 1004.95	P/N: XB25 MW6265-W
B14	X-pipe	without Mufflers	Side-exit, blunt-cut	2.5"	$ 842.95	P/N: XB25M N6265-W
B15	X-pipe	with Mufflers	Side-exit, blunt-cut	3.0"	$ 1142.95	P/N: XB30 MW6265-W
B16	X-pipe	without Mufflers	Side-exit, blunt-cut	3.0"	$ 918.95	P/N: XB30M N6265-W

*** Prices do not include Shipping, Handling or California Sales Tax, if applicable ***

Prices subject to change without notice.

63-65 BELVEDERE, CORONET, FURY, POLARA, SATELLITE, SAVOY

Line #

B17	H-pipe	with Mufflers	Turndown, angle-cut	2.5"	$ 948.75	P/N: B25 MWM6365
B18	H-pipe	without Mufflers	Turndown, angle-cut	2.5"	$ 792.95	P/N: B25 MNM6365
B19	H-pipe	with Mufflers	Turndown, angle-cut	3.0"	$ 1102.95	P/N: B30 MWM6365
B20	H-pipe	without Mufflers	Turndown, angle-cut	3.0"	$ 864.95	P/N: B30 MNM6365

B21	X-pipe	with Mufflers	Turndown, angle-cut	2.5"	$ 1004.95	P/N: XB25 MW6365
B22	X-pipe	without Mufflers	Turndown, angle-cut	2.5"	$ 842.95	P/N: XB25 MN6365
B23	X-pipe	with Mufflers	Turndown, angle-cut	3.0"	$ 1142.95	P/N: XB30 MW6365
B24	X-pipe	without Mufflers	Turndown, angle-cut	3.0"	$ 918.95	P/N: XB30 MN6365

*** Prices do not include Shipping, Handling or California Sales Tax, if applicable ***

Prices subject to change without notice.

(Top of page)

2.	62-65 B-BODY HEADER-BACK EXHAUST SYSTEMS (Headers sold separately)

Header-back exhaust systems include

• Mid-Section Assembly (H-pipe or X-pipe design)

• Dynomax Super Turbo Mufflers (Available with or without)

• Muffler Hangers

• Muffler Hanger Body Brackets

• Over-Axle Tailpipes

• Tailpipe Hanger Receptacles

• Clamps & hardware necessary for the bolt-on installation

(!) Header adapters will be required to transition headers to the exhaust system.

(!) Header information required when ordering: Header model no. & collector size.

• Application Footnotes: 01, 10, 57, 61

• Accessories & Component Parts

Mid-Pipe Design

Choose H or X

Mufflers

Choose with or without

Tailpipe Style

O.D.

Tube Size

Price

Header-back systems

(Click P/N for illustration .PDF)

PART NO'S...

62 BELVEDERE, DART, FURY, POLARA, SAVOY

Line #

B25	H-pipe	with Mufflers	Turndown, angle-cut	2.5"	$ 810.95	P/N: B25 HWM62
B26	H-pipe	without Mufflers	Turndown, angle-cut	2.5"	$ 693.95	P/N: B25 HNM62
B27	H-pipe	with Mufflers	Turndown, angle-cut	3.0"	$ 997.95	P/N: B30 HWM62
B28	H-pipe	without Mufflers	Turndown, angle-cut	3.0"	$ 753.95	P/N: B30 HNM62

B29	X-pipe	with Mufflers	Turndown, angle-cut	2.5"	$ 893.95	P/N: XB25 HW62
B30	X-pipe	without Mufflers	Turndown, angle-cut	2.5"	$ 733.95	P/N: XB25 HN62
B31	X-pipe	with Mufflers	Turndown, angle-cut	3.0"	$ 1043.95	P/N: XB30 HW62
B32	X-pipe	without Mufflers	Turndown, angle-cut	3.0"	$ 818.95	P/N: XB30 HN62

*** Prices do not include Shipping, Handling or California Sales Tax, if applicable ***

Prices subject to change without notice.

62-65 STATION-WAGONS

Line #

B33	H-pipe	with Mufflers	Side-exit, blunt-cut	2.5"	$ 810.95	P/N: B25 HWM6265-W
B34	H-pipe	without Mufflers	Side-exit, blunt-cut	2.5"	$ 693.95	P/N: B25 HNM6265-W
B35	H-pipe	with Mufflers	Side-exit, blunt-cut	3.0"	$ 997.95	P/N: B30 HWM6265-W
B35	H-pipe	without Mufflers	Side-exit, blunt-cut	3.0"	$ 753.95	P/N: B30 HNM6265-W

B36	X-pipe	with Mufflers	Side-exit, blunt-cut	2.5"	$ 893.95	P/N: XB25 HW6265-W
B37	X-pipe	without Mufflers	Side-exit, blunt-cut	2.5"	$ 733.95	P/N: XB25 HN6265-W
B38	X-pipe	with Mufflers	Side-exit, blunt-cut	3.0"	$ 1043.95	P/N: XB30 HW6265-W
B39	X-pipe	without Mufflers	Side-exit, blunt-cut	3.0"	$ 818.95	P/N: XB30 HN6265-W

*** Prices do not include Shipping, Handling or California Sales Tax, if applicable ***

Prices subject to change without notice.

63-65 BELVEDERE, CORONET, FURY, POLARA, SATELLITE, SAVOY

Line #

B40	H-pipe	with Mufflers	Turndown, angle-cut	2.5"	$ 810.95	P/N: B25 HWM6365
B41	H-pipe	without Mufflers	Turndown, angle-cut	2.5"	$ 693.95	P/N: B25 HNM6365
B42	H-pipe	with Mufflers	Turndown, angle-cut	3.0"	$ 997.95	P/N: B30 HWM6365
B43	H-pipe	without Mufflers	Turndown, angle-cut	3.0"	$ 753.95	P/N: B30 HNM6365

B44	X-pipe	with Mufflers	Turndown, angle-cut	2.5"	$ 893.95	P/N: XB25 HW6365
B45	X-pipe	without Mufflers	Turndown, angle-cut	2.5"	$ 733.95	P/N: XB25 HN6365
B46	X-pipe	with Mufflers	Turndown, angle-cut	3.0"	$ 1043.95	P/N: XB30 HW6365
B47	X-pipe	without Mufflers	Turndown, angle-cut	3.0"	$ 818.95	P/N: XB30 HN6365

*** Prices do not include Shipping, Handling or California Sales Tax, if applicable ***

Prices subject to change without notice.

(Top of page)

62-65 B-BODY FOOTNOTES

FN01	HEADER ADAPTERS Header adapters will be required to transition Headers to an Exhaust System. TTi Headers are supplied with adapters, however, if transitioning the exhaust system from headers other than TTi's, a Header Adapter Kit will be required. Kits include all necessary material to custom fabricate adapters. Sold separately. Accessories & Component Parts
FN10	DANA-60 REAR Tailpipes will not fit applications with the RMS Street-Lynx rear suspension / Dana-60 rear-end. However, tailpipes will fit a Dana-60 rear-end with the factory suspension leaf springs.
FN57	RELOCATED LEAF-SPRINGS Tailpipes will not fit applications if the leaf springs have been moved inboard for added tire clearance. However, clearance can be achieved in the following applications, 62-76 A-bodies, 62-67 B-bodies & 65-73 C-bodies by running a Fuel Cell and Mufflers with an offset inlet / offset outlet. Mufflers may require modification to the muffler slips for proper fit and alignment due to the muffler case length and width differences.
FN61	GEAR VENDORS OVERDRIVE H or X-pipe exhaust systems will not clear the Gear Vendors overdrive unit. (The GVOD tail shaft occupies the same space as the X in the X-pipe mid-section)

ACCESSORIES & COMPONENT PARTS

		Part No.	Price
	HEMI HEAT TUBE NIPPLE Tube nipple installed in the passenger-side Hemi exhaust-pipe. Special-Order lead-time: 5-7 days	MISC-HTEP	$ 57.10 ea.

OVAL Polished Exhaust Tips (Plymouth)

304SS, Slip-on style, inlet notched for clamping, 1.75 x 4.25 x 11.5" overall length, single wall, angled-cut, includes band clamps and rivets to firmly hold tips in place.

2.5" I.D. inlet ... TIP25-OV

3.0" I.D. inlet ... TIP30-OV

$ 208.00 /set

$ 218.00 /set

RECTANGLE Polished Exhaust Tips (Dodge)

304SS, Slip-on style, inlet notched for clamping, 1.75 x 4.25 x 11.5" overall length, single wall, angled-cut, includes band clamps and rivets to firmly hold tips in place.

2.5" I.D. inlet ... TIP25-RE

3.0" I.D. inlet ... TIP30-RE

$ 208.00 /set

$ 218.00 /set

ROUND Polished Exhaust Tips

304SS, Slip-on style, inlet notched for clamping, 3.0" body x 14.0" overall length, single wall, angled-cut, includes band clamps and rivets to firmly hold tips in place.

2.5" I.D. inlet ... TIP25-RO

3.0" I.D. inlet ... TIP30-RO

$ 177.00 /set

$ 185.00 /set

TURNDOWN Aluminized Tips

Made of 16 gauge aluminized tubing (same material & gauge as the exhaust system), mandrel bent, slip-on clamp style, inlet-end notched for clamping. Includes band clamps.

2.5" I.D. inlet ... TIP25-TDT

3.0" I.D. inlet ... TIP30-TDT

$ 46.95 /set

$ 52.95 /set

SLIP-CONNECTORS (aka Tube Length Extenders)

9.0" long slip-connectors add additional tube length between the mid-pipe and the muffler inlet when running mufflers shorter than the exhaust system was designed for. Cutting may be required for desired length. Includes U-bolt clamps. (I.D. inlet x O.D. outlet)

2.5" I.D. inlet ... SC25

3.0" I.D. inlet ... SC30

$ 20.60 /set

$ 23.64 /set

HEADER ADAPTER KITS (Kits for long tube headers)

Kits include (2) 6" long 3-bolt flanged reducer adapters, (2) 90-degree aluminized bends, (2) 3-bolt gaskets, 6-pc hardware set, and fabrication instructions. See fabrication instruction sheet #90

Header Collector Size	Exhaust System Size	Part No.	Price
3.0"	2.5" O.D.	AD-302590	$ 87.55
3.0"	3.0" O.D.	AD-303090	$ 92.70
3.5"	2.5" O.D.	AD-352590	$ 100.95
3.5"	3.0" O.D.	AD-353090	$ 106.10
4.0"	3.0" O.D.	AD-403090	$ 116.40

Discounted Price

when purchased with exhaust system

$ 53.00 /set

SHORTY HEADER ADAPTER KIT (Kit for Schumacher shorty headers)

Kits include (4) 90-degree aluminized bends, (2) 2.5" 2-bolt flanges, 4-pc hardware set, and fabrication instructions. See fabrication instruction sheet #91

Header Collector Size	Exhaust System Size	Part No.	Price
2.5"	2.5" O.D.	AD-SC25X90	$ 91.70

Discounted Price

when purchased with exhaust system

$ 53.00 /set

COATING OPTIONS


	SPECIAL-ORDER COATING OPTIONS (Coating Options) Exterior ceramic coating is typically for appearance purpose only, while the thermal barrier coating inside the tubes will add longevity to the life of the exhaust system. A non-refundable deposit is required to start all "Special-Orders". (Lead-time: 3-5 weeks)

(Top of page)

Updated: February 05, 2024

• About Us	• Coating Options	• Mopar Body Style ID	TUBE TECHNOLOGIES, INC. TTi Performance Exhaust & Headers 1555 Consumer Circle Corona, CA 92878-3226 Phone: (951) 371-4878 Fax: (951) 371-6143 Mon-Fri, 8am-4pm PST
• Contact Us	• Product Maintenance & Care	• Mopar Related Websites
• Ordering Information	• Limited Warranty	• Media / Published Articles
• Shipping Rates	• Illustration & Installation Instructions
• Authorized Distributors	• FAQs

Designed and maintained by Tube Technologies, Inc.